REDIT-TUTOR-1

               SETTING UP YOUR ROOMS
               =====================

RCREATE
-------
First think you need to do is 'create' your Vnums that you will be working with. You only need to do this once except in the cases I will mention later. to do this you type the following

rcreate <vnum> <vnum>

You should have seen a message telling you that the rooms where created.

RLOAD
-----
You will need to 'load' your rooms every time you want to work on them. (after the mud goes down). The command is:

rload <low vnum> <high vnum>

*NOTE*
This is best aliased because you will be using it a lot. so type the following:

alias rload rload <low vnum> <high vnum>

You should get a message like Searching and loading rooms...

*BEWARE*
If you are working on your area and you rload it without having rsaved, you will lose any work to the last rsave.

RSAVE
-----
Also you need to make a 'save' command for your rooms. Save often if the game crashes you could lose a lot of work. Type the following:

rsave <low vnum> <high vnum>

Then every time you do some witting remember to save..I try to save every room or two.

*NOTE*
This is best aliased because you will be using it a lot. so type the following:

alias rsave rsave <vnum> <vnum>

*BEWARE*
If you rsave when your rooms are not loaded you will erase all your rooms. make sure your rooms are loaded when you rsave.