ZSAVE

This command copies all of the entries in the zone table that affect the rooms in the range you specify.

You can use the same name for a set of rooms, objects, mobiles, and zones. (For example, the zone that goes along with the "underkeep" room file could also be called "underkeep".)

Archives remember what range they were saved as. The second and successive times that you save, you can omit the range unless you wish to change it.

WARNING! The save commands WRITE OVER the existing file, so be sure to save all the rooms that belong with the specified zone file and not just the rooms you recently zoned.

If you specify the recover option, this command will swap your current archive with the one saved immediately before that. Thus this can be used to recover from a mistaken save.

The "share" option is used to indicate that this archive should be accessible by the specified builder. Archives remember sharing so this parameter only needs to be set up once. If you would like to stop sharing this archive, or share it with someone different, enter the "noshare" option. You can specify more than one builder to share with by specifying multiple share options.